5-pin connector cable for 10mm wide SMD 5050 RGBW LED strips with 5 contacts (+, G, B, R and W). Not suitable for 12mm wide SMD 5050 RGBW LED strips.Application: Connect between 2 RGBW LED strips together, go around a corner or space. Easy installation: no soldering required. Simply attach the LED strips into the connector.Flexible and Durable: The pure tinned copper wires are stranded inside, so it can withstand a lot of bending without breaking. Pure copper wires galvanized with tin can prevent oxidation, which ensures flexibility, durability, perfect electrical conductivity and longer service life.Ideal for DIY projects. If you don't need the connector, you can cut it and solder it to the cable, LED strip or LED controller.Installation Instructions:1. Make sure your LED strip is a 10mm wide 5 pin RGBW 5050 LED strip and has 5 copper contacts (+, G, B, R, W).2. Carefully cut your LED strip along the cut line/solder line.3. Open the connector cap.4. If you are using a non-waterproof LED strip, insert it into the connector. Make sure the 5 copper contacts of the LED strip are under the 5 pins of the connector;If you are using a waterproof LED strip, first remove the silicon around the solder line/line cutting, then insert the LED strip into the connector. Make sure the 5 copper contacts of the LED strip are under the 5 pins of the connector.5. Close the cap.Important note:If the LED strips are flashing or not lighting up, please follow the following steps: 1. Power on your LED strip.2. Open all connector caps.3. Insert your LED strip into the connector, lightly pull and push your LED strip to adjust the contact points between the 5 copper contacts of your LED strip and the 5 electrical conductors of the connector. If the LED strips still do not light up, use a thin, hard object to press both ends of each electrical conductor of the connector simultaneously, to lower the position of the contact points on all 5 electrical conductors. In this way, the 5 electrical conductors of the connector can totally touch the 5 copper contacts of the LED strip, which ensures good electrical conductivity.The package includes:< /p>10pcs LED cable, 17cm long